I easily install a low pressure tank
Low-pressure boilers are usually made of porcelain and are part of the basin on which they are deposited.
Cistern and basin are formed in a set of usually high aesthetics and are ergonomic when using the basin, with the ability to operate with a water saving mechanism (2 buttons).
The cistern is placed provided that the basin is installed and connected to the sewer system. The package usually includes detailed assembly instructions and all the necessary accessories.
Cistern and basin are formed in a set of usually high aesthetics and are ergonomic when using the basin, with the ability to operate with a water saving mechanism (2 buttons).
The cistern is placed provided that the basin is installed and connected to the sewer system. The package usually includes detailed assembly instructions and all the necessary accessories.
You will need
- Necessary tools
- 1 electrician screwdriver
- 1 drill
- 1 electronic water heater
- Necessary materials
- nuts
- nuts
- 1 WC basin
- 1 cistern
- flexible connection pipes
- Difficulty level
The preparation of the cistern
up
We assemble the rinsing mechanism according to the attached instructions of the manufacturer.
We place the flange in the hole of the basin that leads the water from the cistern to the basin.
Attach the mechanism to the cistern by screwing the plastic nut to the outside of the base with the special mounting key of the mechanism.
The installation of the cistern
up
Attach from a mounting screw to the holes at the bottom of the cistern on either side of the rinsing mechanism.
Place the cistern in the basin so that the screws pass through the corresponding holes in the basin and fasten it to the basin with the plastic nuts.
The connection of the mechanism
up
Attach the side filling mechanism to one of the side holes of the cistern.
We connect the filling mechanism to the water supply with a spiral pipe of suitable length. A switch must be inserted between the pipe and the filling mechanism.